JOYO BanTamP Firebrand Tube Amp 20 watt Wall of Sound
The immense wall of sound that is coming out of these little Bantamps is unbelievable. This is the type of sound that we know from the huge 150 Watt tube heads, but you would never expect a small and portable amplifier to sound so huge and aggressive.
Your chords will chug and punch. Your solos will cut through the mix.
The Firebrand also works great at lesser gain settings and lets you use your favorite overdrives to push it into higher gain with their own unique flavors.
Once you start working with this amp, you will soon forget its size and very affordable price. It will feel as if you are playing through a much bigger head and your friends just won’t believe where your sound is really coming from.
2 Channels Bluetooth Headphone Out FX Loop 8 Ohm Out Bluetooth
The amp operates with a single 12AX7 tube in the preamp
and uses a solid state power amp.
The FX loop enables you to put your time based effects
(or Phasers, Flangers and Choruses) behind the drive section
and keep the effects sharp and not prevent them from being too
muddy. Because of the High Gain structure of this amp, a noise
gate, like our “Gate of Kahn“ is a good idea to make your heavy
chords nice and tight.
The amp also has a CLEAN channel that can take pedals really
well, which makes it flexible and a great little companion for
many situation where your „big“ head is just not sensible.
The amp has a speaker out rated at 8Ω. (It can also be operated at 16Ω)
Careful, the amp is small, but loud… its 20 Watts can be quite a handful.
If you want to practice quietly, use the built in headphone out with speaker emulation.
The icing not the cake is the BLUETOOTH connectivity. Easily connect with your
BLUETOOTH enabled device and play music through the BantamP.
This is great to practice with play-along or to learn songs.
- Power: 20 Watt
- Preamp with 12AX7 tube
- 2 Channels: Clean and overdrive
- Controls: Gain, tone and volume
- FX loop
- Bluetooth On / Off switch (for receiving a Bluetooth signal)
- 8 or 16 Ohm loudspeaker output
- Headphone output over 3.5 mm mini-jack
- Dimensions: 163 x 110 x 140 mm
- Weight 1.2 kg
- Power supply included
There are 6 BanTamP models in this series.
The BantamP series amps consist of very small amps that are tuned to fit a specific sound. The ZOMBIE goes for a thick American metal sound.
This amp sounds very nice clean and takes pedals extremely well. When the high gain drive channel is engaged you can further push it with pedals to alter the frequency response.
The FX loop allows you to use your effects post distortion so they sound nice and defined.
The amp also has BLUETOOTH and you can easily run your music or play-alongs through it.
The headphone out has a speaker simulation so that you can practice at home without disturbing anyone.
The amp has a tube in the pre-amp section. The power amp is solid state.
(BantCab NOT included)