Mooer Micro Preamp 013 Matchbox
Initially we are releasing a set of 10 models, each based on a different popular tube amplifier from a range of manufacturers. These have been designed to be used with the upcoming MOOER power amp or in the effects return of any standard guitar amplifier. The speaker cab simulation allows the user to connect direct to a soundcard, powered monitor or P.A. without the need for a guitar amp or speaker cab at all.
• High quality dual channel preamp
• Independent 3 band EQ, Gain and Volume controls for each channel
• Speaker cabinet simulation on/off
• 2 different modes for footswitch operation. On/Off or channel A/B
• 013 is based on Matchbox Matchless C30®
(*the mentioned manufacturer and product names are trademarks or registered trademarks of their respective owners,the trademarks were used merely to identify the sound character of this product.)
Connect a DC 9V 220mA centre pin negative power supply
Connect your instrument directly or the output of your pre, pre-amp effects like Overdrive, distortion, etc.
Connect to a power amp or your amplifier’s effects return.(Highly recommend using a tube amplifier)
Different power amplifiers will affect the outcome of the final tone.You can also connect directly to a sound card and activate the speaker cab simulation for recording purposes
Note: You can connect your “fx loop” effects, like modulation and time based effects, in between the MOOER preamps output and the input of the power amp (fx return)
|Volume||volume of preamp|
|Gain||gain of preamp|
|CH/CAB||select channel/function of footswitch|
|Power||9V DC, 300mA, center pin minus|
|Dimensions||(DxWxH) 93.5 x 42 x 52mm|
|Model||Mooer Micro PreAmp 013|
Power requirements: AC adapter 9V DC , center negative.（Highly recommend to use Mooer Micro Power.）
Note: Mooer PreAmps require a 9 volt power supply with 300mA to function properly.
Dimensions:93.5mm(D) x 42mm(W) x 52mm(H)